Used for drawing single or double copper rods for electrical purposes;
Produce copper wires of size φ1.2-4.5mm from a copper rod of φ8mm.
Each drawing rim is driven by an individual motor. Each compression ratio can be set appropriately and convenient for calculating die series.
The mechanical speed is synchronized with the motor speed. The dies can be replaced quickly and the bobbins can be unloaded automatically without stopping machine.
Copper Rod Breakdown with Annealing Production Line
1. Description
Used for drawing single or double copper rods for electrical purposes.
Produce copper wires of size φ1.2-4.5mm from a copper rod of φ8mm.
Each drawing rim is driven by an individual motor. Each compression ratio can be set appropriately and conveniently for calculating the die series.
The mechanical speed is synchronised with the motor speed. The dies can be replaced quickly, and the bobbins can be unloaded automatically without stopping the machine.
2. Equipment Pictures
3. Technical Parameters
| Drive Mode | Model | Inlet Dia | Wires | Outlet Dia | Max.Speed | Max.Die.No. | Capstan Dia | Installed Capacity |
Individual Drive | 450/9 | Φ8mm | 1 | Φ2.1-4.2mm | 25m/s | 9 | Φ450mm | 400Kva |
| 450/11 | Φ8mm | 1 | Φ1.7-4.2mm | 28m/s | 11 | Φ450mm | 450Kva | |
| 450/13 | Φ8mm | 1 | Φ1.2-4.2mm | 30m/s | 13 | Φ450mm | 500Kva | |
| 450/9*2 | Φ8mm*2 | 2 | 2*Φ2.05-3.2mm | 25m/s | 9 | Φ450mm | 900Kva | |
Linear Single Motor Drive | 450/9 | Φ8mm | 1 | Φ2.1-4.2mm | 25m/s | 9 | Φ450mm | 400Kva |
| 450/11 | Φ8mm | 1 | Φ1.7-4.2mm | 28m/s | 11 | Φ450mm | 450Kva | |
| 450/13 | Φ8mm | 1 | Φ1.2-4.2mm | 30m/s | 13 | Φ450mm | 500Kva | |
| 450/9*2 | Φ8mm*2 | 2 | 2*Φ2.05-3.2mm | 25m/s | 9 | Φ450mm | 900Kva | |
Take-Up Type (Optional) | 1、 630Single bobbin take-up； 2、630Dual bobbin take-up； 3、800Single bobbin take-up； 4、 800Dual bobbin take-up； 5、830Vertical pay-off； 6、Or above combination。 | |||||||
4. Layout
5. Application Demonstration
According to the need, it can be configured with a variety of winding forms.
