Cage-Type Stranding Machine can be equipped with a maximum of 24 filling devices according to customer requirements. Cage-Type Stranding Machine provides loading-crane and loading-car.
Cage-Type Stranding Machine can be equipped with a maximum of 24 filling devices according to customer requirements. Cage-Type Stranding Machine provides loading-crane and loading-car.
1. Description
Cage-type stranding machine works with 100% back twist movement. It is suitable for steel core aluminum stranding
wires, aluminum-clad steel, bare copper, bare aluminum, power optical cable, and the stranding of other wire materials.
It can be used for laying up 19/37 cores control cable and steel wire armoring cable.
It adopts a magnetic hysteresis tension controller to provide bobbin tension. A set of bobbin bottom diameter detectors is
installed in each section of the cage to automatically detect the change of the position from full bobbin to empty bobbin,
and then feed back to the PLC, which adjusts the output torque of the magnetic hysteresis tension controller to ensure constant
tension.
The DC main motor drives the stranded body through the ground shaft, or an AC induction servo motor drives each segment
of the stranded body.
The machine adopts an MMI+PLC control system, pre-setting stranding pitch, stranding direction, and automatic tension
control and synchronous control of traction and take-up.
The machine provides a loading crane and a loading car for selection.
It can be equipped with a maximum of 24 filling devices according to customer requirements.
2. Equipment Pictures
3. Technical Parameters
Model | 500 | 630 | |
Diameter of a single wire | Copper | Φ1.5～Φ3.0 | Φ1.5～Φ5.0 |
Aluminum | Φ1.8～Φ4.0 | Φ1.8～Φ5.0 | |
Insulated cores | Φ3.0～Φ8.0 | Φ3.0～Φ10.0 | |
Maximum stranded conductor OD | Φ45 | Φ50 | |
Stranding lay length Step-less, adjustable | |||
Maximum rotating speed | 6B | 100 | 70 |
12B | 100 | 70 | |
18B | 70 | 62 | |
24B | 62 | 50 | |
Capstan | （m/min） Maximum pulling speed | 51 | 42 |
Payoff reel in the cage | PN500/PND500 | PN500/PND500 | |
Center payoff reel | PN800/PN1600 | PN800/PN1600 | |
Take-up reel | PN1600/PN2500 | PN1600/PN2500 | |
Central height | 1000 | 1000 | |
4. Layout
5. Application Demonstration
It is suitable for the stranding of steel core aluminum stranding wires, aluminum-clad steel, and other wires.
It can be used for laying up 19/37 cores control cable and optical cable.
It can be equipped with a maximum of 24 filling devices according to customer requirements.
The machine provides a loading crane and a loading car.
