Aluminum Rod Breakdown Machine with Individual Motors is used to produce aluminum wires sized φ1.68-4.5mm from aluminum rods of φ9.5mm or wire φ2.0- 4.0mm from aluminum alloy rods of φ9.5mm.

Used for drawing single or double copper rods for electrical purposes;Produce copper wires of size φ1.2-4.5mm from a copper rod of φ8mm.Each drawing rim is driven by an individual motor. Each com...

Double-wire Intermediate Wire Drawing Continuous Annealing Production Line is suitable for producing the minimum. diameter ∅0.4mm fine wire from raw material 2.6-3.5mm diameter copper wire.

The high-speed double-headed copper wire drawing machine is used to draw a copper wire from “0.6-1.05mm” into “0.15- 0.50mm”. The drawing drum adopts a tower wheel structure, with conti...

Use to continuously draw the ∅1.8mm copper wire to ∅ 0.15-0.5mm, and it can be annealed online.It can draw multiple heads at the same time, and it has high production efficiency, solving the site and ...

14DT Copper fine wire drawing machine with annelaingInlet：0.8-1.6mm   Outlet：0.25-0.8mm

This machine is suitable for drawing 0.5 mm-1.2 mm low-oxygen or oxygen-free copper wire into 0.08-0.25 mm copper wire and annealing and softening directly after drawing.

YSY-24D Fine Wire Drawing MachineHorizontal typeInlet Dia.:Φ0.5—Φ1.2mmOutlet Dia.:Φ0.10—Φ0.32mm

This machine is suitable for drawing 0.14 mm-0.45mm low-oxygen or oxygen-free copper wire into 0.04-0.12 mm copper wire, softening directly after drawing.