This machine is suitable for drawing 0.5 mm-1.2 mm low-oxygen or oxygen-free copper wire into 0.08-0.25 mm copper wire and annealing and softening directly after drawing.
This machine is suitable for drawing 0.5 mm-1.2 mm low-oxygen or oxygen-free copper wire into 0.08-0.25 mm copper wire and annealing and softening directly after drawing.
The equipment components:
a) YSY-22/24DT Machine: 1 Set
b) Electrical apparatus control system: 1 Set
c) Steam generator 380V6KW: 1 Set
d) Pay-off rack:1 Set
e) Drawing pump and cooling water pump, and heat exchanger:1Set
Technical parameter:
Inverter Control | Double inverter control |
Max. Die No. | 22/24 |
Max. Inlet Dia.(mm) | Φ0.5mm—Φ1.2mm |
Outlet Dia.(mm) | Φ0.08—Φ0.25mm |
Max. Line Speed(m/min) | Max.1800m/min(annealing Max.1500m/min) |
Slip ratio of m/c(%) | 13% |
Fix speed capstan of m/c(%) | 8% |
Body Structure | Welded by a steel plate |
Drawing capstan | Ceramic plasma capstan |
Main motor power(kw) | 11KW |
Take-up motor(kw) | 3.7KW |
Drawing capstan Dia.(mm) | Φ194mm |
Fix speed capstan Dia.(mm) | Φ160mm |
Annealing wheel Dia. | Φ160mm |
Max annealing voltage | DC0~60V |
Max annealing current | DC0～200A |
Protection type | Steam or nitrogen |
Take-up shaft size | Φ300mm or according to the customer |
The type of take-up machine | Shaft type |
Traversing type | 110W synchronous motor |
Transmission type | Flat Belt |
Take-up control | PID Displacement Detection Automatic Control |
Displacement detection setting | Air pressure type |
Tension control type | Weight balance type |
Max. Loading weight | 50KG |
Lubrication type | spray |
brake | Disk brake |
voltage | 380V 50HZ |
Lubrication oil | 40liter/min |
Weight | 2600KG |
Take-up bobbin size: MAX 300mm
OD | ID | OW | IW | aperture |
300 | 215 | 290 | 270 | 127 |
