14DT Copper fine wire drawing machine with annelaing
Inlet：0.8-1.6mm Outlet：0.25-0.8mm
14DT Copper fine wire drawing machine with annelaing
Inlet：0.8-1.6mm Outlet：0.25-0.8mm
一、Component of equipment:
1. Pay off stand: 1set
2.YSY-14DT fine wire drawing machine(Trinity machine): 1set
3. Steam Generator（380V/6KW): 1set
4. Electrical control system (wire drawing and annealing): 1set
5. Wire drawing pump and cooling water pump plate exchanger: 1set
6. Connected wire and cable inside of equipment: 1set
二、Technical Parameter：
Power control | Dual variable frequency control |
Most eye modulus | 14 |
Inlet wire diameter | Φ0.8—Φ1.6mm |
Finished wire diameter | Φ0.25—Φ0.8mm |
Max line speed | MAX1200m/min |
Mechanical reduction area | 15% |
reduction area of final capstan | 8% |
Main structure | Steel plate welding and tempering treatment |
drawing wheel | Surface-sprayed porcelain treatment |
wire-pass wheel | Surface-sprayed porcelain treatment for Aluminum guide wheel |
drawing power | 15KW6P |
take up power | 4KW |
drawing wheel diameter | Φ316mm |
final capstan diameter | Φ268mm |
annealing wheel diameter | Φ120mm |
annealing voltage | DC0~55V |
annealing current | DC600A |
annealing protection way | Steam or nitrogen |
Coiling shaft size | Φ300mm or client requested |
Take up way | top core screw type |
traversing way | 400W Servo motor |
transmission way | Flat belt transmission |
Coiling control | PID Automatic detection of displacement detection |
Displacement detection device | Counterweight swing arm type |
Tension adjustment mode | Counterweight mode |
Maximum load capacity | 50KG |
drawing lubrication way | Sprinkler |
Brake | Electromagnetic brake |
using Voltage | 380V50/60HZ |
Drawing oil | 40 Litre / min |
Dimension | 2600*1600*1800mm |
weight | 3600KG |
Compressed Air requested：
Working pressure | 0.6～0.7 Mpa |
Fluctuation value | +0.02 Mpa |
Dew point | -25 ℃ |
Flow | 200 L/min |
water consumption requested：
Working pressure | 0.2-0.4 Mpa |
Temperature | ≤25 ℃ |
Water hardness of Steam generator | max 5 dH |
Water hardness of Coolant for annealing machine | max 12 dH |
PH Value | 7～8 |
flow | 420 L/min |
Caution: cooling water shall not contain suspended solids, minerals, metallic impurities, or insoluble or corrosive substances.
line speed reference ：
Wire diameter（㎜） | Line speed（m/min） | Elongation | |
TY（Hard wire） | TR（Soft wire） | ||
0.30 | 1200 | 1000 | 15～25% |
0.35 | 1100 | 1000 | 15～28% |
0.40 | 900 | 900 | 20～30% |
0.60 | 700 | 700 | 20～32% |
Production line color: mechanical part customer request, electric cabinet part is rice white.
Operation direction: right direction operation. Definition of operation direction: the operator is oriented towards the drawing host, from the left side into the line and the right side to take up the line.
Suitable for raw materials: low oxygen or oxygen-free round copper wire Cu. Maximum incoming wire specification 1.6mm.
