This machine is suitable for drawing 0.14 mm-0.45mm low-oxygen or oxygen-free copper wire into 0.04-0.12 mm copper wire, softening directly after drawing.
This machine is suitable for drawing 0.14 mm-0.45mm low-oxygen or oxygen-free copper wire into 0.04-0.12 mm copper wire, softening directly after drawing.
Technical parameter:
Machine type | YSY-24DV | YSY-20DV |
Inlet diameter | 0.14-0.45mm | 0.14-0.45mm |
Outlet diameter | 0.04-0.12mm | 0.005-0.12mm |
Drawing line speed | 2000MPM | 2000MPM |
Drawing dies No./Max. | 24 | 20 |
Slip ratio of m/c | 8% | 8% |
Fix speed capstan slip ratio | 7% | 7% |
Capstan | Ceramic plasma | Ceramic plasma |
Capstan dia. (Max) | 100 | 100 |
Fix speed capstan dia. | 100 | 100 |
Frame | Welded by steel plate | Welded by steel plate |
Main motor | 4KW three-phase inductor motor | 4KW three-phase inductor motor |
Revise system | PID synchronous spooler | PID synchronous spooler |
Inverter control | Dual inverter control | Dual inverter control |
Transmission type | By flat belts | By flat belts |
Send-out method | Overhead | Overhead |
Traversing unit | Hairbrush wire placement | Hairbrush wire placement |
Tension control | Tension tape wheel device | Tension tape wheel device |
Lubrication system of wire drawing | Spray type | Spray type |
Suitable diameter of spool | 200mm,250mm,300mm | 200mm,250mm,300mm |
Capacity for wire receiving | 15-50KG | 15-50KG |
Power source | 380V | 380V |
Brake | Magnetic brake | Magnetic brake |
Dimension | 1740*1300*1450mm | 1740*1300*1450mm |
Weight | 1200KG | 1200KG |
